ERP-1000 EVENT RECORDER PANEL
- Flexible construction: 1.000 Signal capacity (can be increased up to 5,000). If there are ISP annunciators in the existing system, events can be recorded by adding them to the system.
- Modular structure for quick troubleshooting
- Turkish installation and operating instructions
- Internal Compact Industrial Server Fanless Computer
- 17 "LCD screen, 1u, 19" drawer KVM console
- Easy Turkish Programming with ISPsimTM Software
- Self and Remote Monitoring and Reporting with ISPoperatm Software.
- Monitoring instant alarm; Multiple substations online monitoring with the same software (wide area monitoring)
- Modern warning methods; SMS and e-mail feature
- User authorization
- Alarms can be received continuously from the printer without a computer
- Remote update and upgrade can be done
- It has been tested and certified according to EN61000-2 / EN61000-4 standards
New HEEP-3000 model event recording system RTU, provides all the Plants from Power Generation, till Transmission and Distribution with the most advanced monitoring, alarm annunciation and event recording, and helps to easily find the reason of the fault after investigating data provided by HEEP3000. By the advantage of utilizing Input Modules, Annunciators and Event Processor, operators will be very quickly aware of rapid change of input status in the plant from local HMI (SCADA) or remote host or annunciators/Dx Alarm Indicators
30.000 pcs of historical events are stored in the event processor memory so as to be used in case of the connection failure between host and Event Processor HEEP3000. Additionally, when there is a communication failure between Event Processor HEEP3000 and downstream, Input Modules are capable of storing 2.000 pcs of historical events and ISP800 series Annunciators are capable of storing 1.000 pcs of historical events in their memory. Horn or bell setting of each channel of alarm annunciators and Input Modules is easily performed by using user-friendly ISPsim™ software tool running on windows.
Now it is very easy remotely to monitor and remotely to report with the help of ISPopera™ Software. Plant or station operators can access clear event records and each channel/input status of annunciators/Input module from this software.
A complete system configuration might consist of Input modules and/or Annunciators, Event Processor, DX Indicator Panels, Server Computer and peripherals such as LCD KVM console, printers, hub etc.
PHOTO GALLERY
GENERAL FEATURES
MODULAR CONSTRUCTION
The ERP-10000 Event Recorder Panel is compact in size of 800x2100x800. The modular structure allows fast change of unit at the time of failure and easy service inside the panel.
HEIM-48 INPUT MODULES
- 2.000 pcs event buffering,
- 48 pcs of input channels,
- RS485 communication port,
- 19”, 1U compact design,
- Working under different voltage levels (110V/220Vdc)
- Protection for overtemperature, shortcircuit, overcurrent/overvoltage
HEEP-3000 EVENT RECORDING RTU
General features
- HEEP3000is of an event processor combining high quality, compact and unique design with low cost.
- Contains high performance microprocessor control.
- Provides high-performance and economic solutions for the SCADA and control applications.
- Could be easily installed in panels by utilizing Rack type, 19”, 1U compact design,
- Capable of connection with 124pcs of HEIM48or 36 channel annunciators,
- All inputs are completely isolated. They are protected by optocouplers and software filters,
- Working capability between wide temperature range,
- Long life battery for system clock
- Programmable response time between 3-250msec,
- Manual restart with 2 pcs of button on the front panel ,
- 1msec resolution,
- Power supply is 110/220VDC
Software features;
- Could store 30.000pcs of historical events in its memory so as to use them in case of connection failure between HEEP3000 and the host,
- 5.000 Signal support
- Real-time synchronization, in 1msec resolution, in IRIG-B time format via GPS, amongst Substations,
- Easily configurable from USB port on the front panel with ISPConfig™ SWtool.
- Easy remote event monitoring and reporting for analysis purposes by utilizing unique IP-based ISPOpera™ software .
Hardware features;
- IP Config and Test Options with 4 front panel buttons and LCD (2×20) Display (IP settings, Test options, real-time values, status etc.)
- Integrated isolated Printer LPT Port
- 24 pcs LED indication for diagnosis
- 2 programmable / 1 fixed (Fault) Relay outputs
- 4pcs isolated RS485 and 2pcs isolated “RS485 / RS232”ports
- 1pcs isolated USB port,
- 1pcs 10/100 Ethernet Port
- 1pcs BNC connector for IRIG-B
- Modbus RTU and Modbus TCP Protocol support
Server computer hardware
- Industrial Grade, Compact Embedded Fanless Computer
- Intel Atom N2600 1.6GHz
- 2GB Memory,
- 64GB Solid State Drive (SSD)
- 10/100/1000Mbps
- DC input 12V 1.5A
- 4pcs of USB Ports
- VGA and HDMI port
- DIN rail
17” Rackmount LCD KVM Console
- Control platform with LCD, keyboard, mouse and multiple ports KVM switch.
- 1U height, suitable for 19’’ standard cabinet installation and metal structure.
- Control platform can be totally pulled out from the cabinet and the LCD screen can be turned on to 120 degrees.
- Monitor: 17”SXGA Color TFT-LCD. Active Area: 337.920(H)×270.336(V) mm. Resolution(optimal): 1280*1024 60HZ. Support Color: 16.7M colors (RGB 6-bits + FRC data). White Luminance: 300 (center,Typ)@7.5Ma. Contrast Ratio: 1000 : 1. Pixel Pitch: 0.264(per one triad)x0.264
- Keyboard: 99keys. Compatible : Windows7. Port: Standard PS/2&USB.Ultra thin keyboard with keypad.
- Mouse: X/Y resolution: 1000dots/inch (✆40x40/mm). Hardware connector: Standard PS/2&USB. Compatible :Windows7. Mouse touch board with two function button.
- CE, RoHS, FCC certified.
- Input power: DC 12V.
Network Hubs: Switched network Hub with 5pcs 0f RJ45 conn., Supplied with DC 12 V.
Prınters: Dot matrix black&white serial via HEEP3000 and colour printers via remote host are available for continuous alarm and report printing.
SYSTEM CONFIGURATION AND MONITORING SOFTWARES
ISPsim Software Tool
With ISPsim™ SW tool; relay output (horn/bell) setting for each channel, response and clearance time setting as well as the ModbusID configuration could be performed. According to model type (24 channels and over) optional ISA18.1 Sequence Code M (Manuel RESET) is provided. Device Firmware updates are done with ISPsim™ software. Additionally, device could be simulated according to stored configuration. The tool enables you to set horn and bell outputs as active or passive. By providing imaginary fault signals, it can be observed how the annunciator responds and performs. ISPsim™ software can be downloaded from here
ISPoperaTM Software
By using ISPopera™ software; remote monitoring of event records via HEEP-3000 RTU could be done up to for 8 pcs of user (ISPopera™ or SCADA). It is enough to set the Station ID and the IP addresses (decided while configuring HEEP-3000) inISPopera™.
The software will provide you detailed monitoring options. Substation selection, event type filtered monitoring (ACK, SET, CLEAR etc), module based monitoring are some of options provided. Instant event records or events in the selected period can be printed out from ISPopera™ software installed host or other remote computers.
It enables to do real-time event recording amongst substations with GPS time synchronization. All of the records could be stored in the server in the central substation. It provides a unique and perfect solution by the capability of event recording in 1 msec resolution.ISPopera™ software can be downloaded from here
PROGRAMMABLE RESPONSE AND RELEASE TIME
There are “software programmable” response – release times which provide flexible and safe performance for protection against induced magnetic fields resulted from maneuvers i.e CB opening/closing especially.With the help of ISPsimTM software; Response and release times are independently set between 3msec and 250msec. Response time is set to 5msec, release time is set to 20msec by default.
CERTIFICATES & APPROVALS FOR HEEP-3000 AND HEIM-48
CE Certifications : CE (ESİM)
EMC Compliance :
EN 61000-4/-2 (+A1/ +A2 Dielectric Withstand)
EN 61000-4-3 (Radiated RFI Immunity)
EN 61000-4-4 (Electrical Fast Transient)
EN61000-4-5 (Surge Immunity)
EN61000-4-6 (Conducted RFI Dist. Immunity)
EN61000-4-8 (Radiated Power Freq. Immunity)
EN61000-4-11(ımmunity to Voltage dips)
EN61326-1 (Equipment for Measurement)
EN55011 (+A2 Emission – Ind. Sci. & Med.)
LVD Compliance :EN61010-1 :1993
DOCUMENTS
TECHNICAL FEATURES
|
Panel |
|
|
Dimensions (WxHxD) |
800x2150x800 mm |
|
Sheet Thickness |
3mm |
|
Acces |
Front and Rear |
|
Cooling |
Fan cooling placed over the top |
|
Colour |
RAL7035 |
|
Cable Type |
0,75mm2(single core and screened crosslinked dual core LIYC for RS485) |
|
Signal Input Capacity |
1000 input signal |
|
Other |
Transparent front panel, filtered In/Out air ducts |
|
Field contact terminations |
|
|
Terminals: |
Screw Type |
|
Terminals per input |
1 for each Dry input and common return |
|
Mechanical Design |
Din Rail Mounted |
|
Connection to HEIM48 and ISP |
Removable grouped screw terminal blocks |
|
Cable Type |
2,5mm2, PVC |
|
HEIM48 Input Modules |
|
|
Chassis |
19”, 1U, Rack Mount Rear Acces, metal structure |
|
Channels |
48Inputs, Dry contact. Contact voltage 110Vdc or 220Vdc |
|
Power Supplies |
110Vdc or 220Vdc |
|
Comm. Network Interface |
RS485 port |
|
Communication Protocol: |
Modbus RTU |
|
Local event Storage |
2.000 Events |
|
HEIM48 configuration |
Configuration tool; ISPSim™ config |
|
HEEP-3000 Event Processor |
|
|
Chassis |
19”, 1U, Rack Mount Rear and Front Acces, metal structure |
|
Ports |
6pcs RS485, 2pcs RS232, 1pcs USB |
|
Printer |
integrated serial LPT printer port |
|
Interfaces |
Ethernet with RJ45 Connector; 10/100Mbps speed |
|
Communication Protocols |
Modbus RTU, Modbus TCP |
|
Relay outputs |
2pcs programmable, 1pcs fixed |
|
Power Supplies |
110Vdc, 220Vdc |
|
Time Synchronization |
GPS time server in IRIG-B format ;1msec resolution |
|
Resolution/Scan Rate |
|
|
Local event storage |
30.000 Events |
|
Monitoring Software |
IP-based software ;ISPOpera™ |
|
Configuration Software |
ISPsim™ |
|
Server Computer |
|
|
Chassis |
Industrial Grade, Compact Embedded Fanless chassis with DIN rail mount |
|
Power Supply |
DC input 12V 1.5A |
|
Processor |
Intel Atom N2600 1.6GHz |
|
Driver/Memory |
64GB Solid State Drive (SSD)/2GB Memory |
|
Network Connection |
Ethernet with RJ connector: 10/100/1000Mbps speed |
|
Ports |
4pcs of USB Ports, VGA and HDMI connection |
|
Peripherals |
|
|
LCD Kvm Console |
|
|
Chassis: |
19”, 1U, Rack Mount withdrawable |
|
Monitor |
17”SXGA Color TFT-LCD, VGA |
|
Keyboard |
99keys, Standard PS/2&USBconn. |
|
Mouse |
X/Y resolution: 1000dots/inch, Standard PS/2&USB conn |
|
alarm/report printers |
dotmatrix printers (optional), laser network printer (optional) |