ISP-8-DX ALARM INDICATOR

8 Channels Led Technology
Alarm Annunciator Function Without Hardwiring to Field Contacts
Default Communication Feature. Isolated RS485 Port And Modbus RTU Protocol Support
Eligible To Be Used In SCADA/Automation Systems
Reliable Performance Under Electromagnetic Interference
Working at Different Voltage Levels. (24/48,110/220 Vdc)
Easy Programming With ISPsim^TM software
Capability Of Relay Output Selection For Each Channel By Using Push-Buttons On The Front Panel
High-Quality And Long Life Power Supply With Protection For Over Temperature, Shortcircuit, Overcurrent/Overvoltage,

TELEPRO-ISP-8-DX Alarm Indicator is a flexible, functional and reliable product used in the protection and control automation systems.

Our product, combining low cost with good quality, compact and unique design, is an unrivaled product with communication features.

In ISP-8-DX, hardwiring inputs are eliminated. Alarms are expected to reach the device via Modbus communication.

Horn and bell selection can be done with push-buttons as well as all the parameters can be set via ISPsim^TM software.

Default RS485 communication port supports Modbus RTU and could be easily integrated with the SCADA systems.

ISP-8-DX could be easily labeled by the aid of dedicated labeling template provided by TELEPRO^®

PHOTO GALLERY

GENERAL FEATURES

MODULAR CONSTRUCTION

TELEPRO-ISP8 Alarm Indicator is an advanced technology product providing compact, flexible programming and labeling options.
It could be easily used in the wide area protection systems, thanks to the parallel working feature.

COMMUNICATION (Default)

Our models with communication provide galvanic isolation protection as a standard, support Modbus RTU protocol through integrated RS485 port and get easily connected with the SCADA systems.

LED INDICATION

LED indication, providing ultra bright illumination which could be seen even in the high lighting environments, is supplied as default for all models.

FULL SOFTWARE CONFIGURATION

With the help of ISPsim™ software (*); relay selection (horn-bell), and the ModbusID setting can be programmed.
ISA18.1 Sequence Code is set to Code M (Manuel RESET) as standard.
In addition, horn-bell selection of all channels can be safely (and independently from software) set with the push-buttons on the front panels without opening panel doors. With the advantages resulted from the unique design, needs for dip switches are eliminated.
(*): ISPsim™ software can be downloaded from here

INPUTS

All hardwiring inputs are eliminated. Alarms are expected to reach the device via Modbus communication. By doing so, you can save cabling for all inputs.

RELAY OUTPUTS

TELEPRO-ISP8 provides 2pcs of NO FormA type dry contact relay outputs by default. Outputs are set to HORN or BELL alternatives. All channels can be set to one of these alternatives with software or push-buttons on the front panel. Additionally, it provides FAULT relay having FormC type NC/NO with the common terminal so as to indicate internal system faults.

HIGH-QUALITY POWER SUPPLY

TELEPRO-ISP8 can be supplied with 2 different voltage level in order to meet the different alternatives used in the distribution system automation. It can be freely connected to the voltage levels of 24/48V, 110/220Vdc. Power supply with the design of protection against shortcircuit, overcurrent/overvoltage and over temperature, guarantees long life

DISPLAY AND LABELING

Having front panel design which membrane featured, providing high-quality appearance. Easily changed, printed out labeling system with the front label size of 7x63 mm dedicated for each channel, is having a user-friendly design . The window for each channel can be named with label template supplied by TELEPRO^® . Whenever requested, labels can be easily changed.

CASE AND MOUNTING

TELEPRO-ISP8 is provided in case configuration, with panel type and UL94V0_Self-extinguishstandard. Mechanical protection of our standard case is of IP51(from the front). Having Standard dimensions of (96x96x75 mm) and weight of 300gr. With user-friendly screwed mounting system, it can be fast and safely mounted/dismantled.

EASY TO USE

Each input is transferred via Modbus from SCADA application. Each channel can be set to HORN or BELL relay according to operator choice. These settings provide a difference in LED indication too. The corresponding channel turns to GREEN when setting to BELL, it turns to RED when setting to HORN.(Optionally Red/Yellow alternative available)

DOCUMENTS

ISP-8 DX Windows Template

ISP-8 DX Wiring Scheme

TECHNICAL FEATURES

Product Type	ISP-8-DX
Supply
Supply Voltage	24/48Vdc	110/220 Vdc
Supply Voltage Range	18...60Vdc	88...242Vdc
Supply Power	5w
Channels
Channel Qty	8pcs
Channel Type	Soft inputs (they are activated via communication)
Outputs
Contact Outputs	48Vdc-1A / 250Vdc-0.2A
Horn Relay	1-Form-A drycontact relay(SPST) (NO)
Bell Relay	1-Form-A drycontact relay(SPST) (NO)
Fault Relay	1-Form-C drycontact relay(SPDT) (NO/NC)
Communication
Communication Port	2 wires RS485
Communication Protocol	Modbus RTU (19200/8/n/1)
User Interface
Buton	Reset – Horn – Test - Ack
Front Panel	Dual Layer, Embossed, Multi Color Membrane, With Sticker Slots
Window dimensions(WxH)	63x7 mm (8 pcs)
Indication	5mm, 2 coloured ( Red / Green) LED (Optional Red/YellowLED )
Audible indication	23mm Buzzer 75 dbA
* Horn – Bell Configuration	With front panel buttons – via ISPsim^TM Software
Case
Case type	Panel type
Dimensions (WxHXD)	96x96x75 mm
Panel Mounting	Plug-in with panel mounting sleeve
Protection Class	IP51
Weight	300 gr
Environmental Features
Operating temperature	-20 C ... +55 ^oC
Storage temperature	-25 C... +80 ^oC
Humidity	0-95% RH
Package
Package type	Carton Box
Package dimensions(WxHxD)	120x105x110 mm
Weight	360 gr