MENU
+90 216 469 73 7308:30 - 18:00[email protected]
PRODUCTS ALARM INDICATOR ISP-32-DX ALARM INDICATOR

ISP-32-DX ALARM INDICATOR


TELEPRO-ISP-32-DX Alarm Indicator is a flexible, functional and reliable product used in the protection and control automation systems.
Our product, combining low cost with good quality, compact and unique design, is an unrivaled product with communication features.
In ISP-32-DX, hardwiring inputs are eliminated. Alarms are expected to reach the device via Modbus communication.
Horn and bell selection can be done with push-buttons as well as all the parameters can be set via ISPsimTM software.
Default RS485 communication port supports Modbus RTU and could be easily integrated with the SCADA systems.
ISP-32-DX could be easily labeled by the aid of dedicated labeling template provided by TELEPRO®

PHOTO GALLERY

GENERAL FEATURES

MODULAR CONSTRUCTION
TELEPRO-ISP32 Alarm Indicator is an advanced technology product providing compact, flexible programming and labeling options.
It could be easily used in the wide area protection systems, thanks to the parallel working feature.
COMMUNICATION (Default)
Our models with communication provide galvanic isolation protection as a standard, support Modbus RTU protocol through integrated RS485 port and get easily connected with the SCADA systems.
LED INDICATION
LED indication, providing ultra bright illumination which could be seen even in the high lighting environments, is supplied as default for all models.
FULL SOFTWARE CONFIGURATION
With the help of ISPsim™ software (*); relay selection (horn-bell), and the ModbusID setting can be programmed.
ISA18.1 Sequence Code is set to Code M (Manuel RESET) as standard.
In addition, horn-bell selection of all channels can be safely (and independently from software) set with the push-buttons on the front panels without opening panel doors. With the advantages resulted from the unique design, needs for dip switches are eliminated.
                (*): ISPsim™ software can be downloaded from here
INPUTS
All hardwiring inputs are eliminated. Alarms are expected to reach the device via Modbus communication. By doing so, you can save cabling for all inputs.
RELAY OUTPUTS
TELEPRO-ISP32 provides 2pcs of NO FormA type dry contact relay outputs by default. Outputs are set to HORN or BELL alternatives. All channels can be set to one of these alternatives with software or push-buttons on the front panel. Additionally, it provides FAULT relay having FormC type NC/NO with the common terminal so as to indicate internal system faults.
HIGH-QUALITY POWER SUPPLY
TELEPRO-ISP32 can be supplied with 2 different voltage level in order to meet the different alternatives used in the distribution system automation. It can be freely connected to the voltage levels of 24/48V, 110/220Vdc. Power supply with the design of protection against shortcircuit, overcurrent/overvoltage and over temperature, guarantees long life
DISPLAY AND LABELING
Having front panel design which membrane featured, providing high-quality appearance. Easily changed, printed out labeling system with the front label size of 51,5x11 mm dedicated for each channel, is having a user-friendly design . The window for each channel can be named with label template supplied by TELEPRO® . Whenever requested, labels can be easily changed.
CASE AND MOUNTING
TELEPRO-ISP32 is provided in case configuration, with panel type and UL94V0_Self-extinguishstandard. Mechanical protection of our standard case is of IP51(from the front). Having Standard dimensions of (288x144x82,5 mm) and weight of 1200gr. With user-friendly screwed mounting system, it can be fast and safely mounted / dismantled.
EASY TO USE
Each input is transferred via Modbus from SCADA application. Each channel can be set to HORN or BELL relay according to operator choice. These settings provide a difference in LED indication too. The corresponding channel turns to GREEN when setting to BELL, it turns to RED when setting to HORN.(Optionally Red/Yellow alternative available)
CERTIFICATES & APPROVALS

EMC Compliance :EN 55014-1 (+A1/+A2 Emission)

    :EN 61000-3-2 (Limits for harmonic currents emissions)

   :EN 61000-3-3 (Limitation of voltage fluctuations and flicker)

   :EN 55014-2 (Immunity)

  :EN 61000-4-2 (Electrostatic discharge immunity test)

  :EN 61000-4-3 (+A1/+A2 Radiated RF electromagnetic field immunity test)

  :EN 61000-4-4 (Electrical Fast transient/burst immunity test.)

                             :EN61000-4-5 (Surge Immunity test)

  :EN61000-4-6 (Immunity to RF conducted disturbances.)

  :EN61000-4-11(Voltage dips, short interruptions and voltage variations immunity tests.)

LVD Compliance :EN61010-1 :2010(3.Edition)

DOCUMENTS

ISP-32 DX Startup Guide
ISP-32 DX Windows Template
ISP-32 DX Wiring Scheme

TECHNICAL FEATURES

Product Type

ISP-32-DX

Supply

Supply Voltage

24/48Vdc

110/220 Vdc

Supply Voltage range

 18-60Vdc

88-242Vdc

Supply power

10w

Channels

Qty of Channels

32pcs

Type of Channels

Soft inputs (they are activated via communication)

Outputs

Contact Outputs

48Vdc-1A / 250Vdc-0.2A

Horn Relay

1-Form-A drycontact relay (SPST) (NO)

Bell Relay

1-Form-A drycontact relay (SPST) (NO)

Fault Relay

1-Form-C drycontact relay (SPDT) (NO/NC)

Communication

Communication Port

2 wires RS485

Communication Protocol

Modbus RTU (19200/8/n/1)

User Interface

PushButton

Reset – Horn – Test - Ack

Front Panel

Dual Layer, Embossed, Multi Color Membrane, With Sticker Slots

Window dimensions(WxH)

51,5x11 mm (32 pcs)

Indication

RGB LED (Red-Green-Yellow-Blue-Purple-turquoise-white)

Audible indication

23mm Buzzer 75 dbA

* Horn – BellConfiguration

With front panel buttons – via ISPsim Software

Case

Case type

Panel type

Dimensions (WxHXD)

288x144x82,5 mm

PanelMounting

Plug-in with panel mounting sleeve

Protection Class

IP51(from the front)

Weight

1200 gr

Environmental Features

Operating temperature

-20 C ... +55 oC

Storage temperature

-25 C ... +80 oC

Humidity

0-95% RH

Package

Package type

Carton Box

Package dimensions(WxHxD)

303x150x105 mm

Weight

1310 gr